RF Applications
Low observability
Your system, such as drone, aircraft, naval mast or ground vehicle, needs to reduce its radar detectability. We design absorbers that target your frequency band and reduce RCS (Radar Cross-Section) from S to Ku band.
Shielding
You need to block electromagnetic interference from propagating through your system. Our shielding solutions deliver up to 35 dB of attenuation, 8 times lighter than solid metal.
Antenna decoupling
Your antennas are coupling with each other, degrading signal integrity and radiation performance. Our absorbers reduce mutual coupling by up to -10 dB, without affecting your radiation pattern.
Cavity resonance - EMC
Your metal enclosure is amplifying interference and disrupting your electronics. We suppress resonances from 10 to 30 dB depending on your system configuration.
RF Load
Your waveguide needs a matched termination to eliminate reflections and protect your RF chain. Our RF loads cover standard waveguides from WR112 to WR34, delivering below -15 dB.
Anechoic chamber
You need to characterize your RF systems in a controlled, interference-free environment. Our 3D-printed absorbers deliver broadband absorption from 1 to 40 GHz.
Navigation
What about HYMAGIN?
HYMAG'IN combines RF engineering expertise with advanced magnetic materials to help engineers solve their electromagnetic challenges. We offer both off-the-shelf absorbers and fully custom solutions, available as filaments, pellets, resins, inks and powders.
Every solution is validated by RF simulations and measurements, and manufactured in France.
